From November 2014 on, the Uruguayan Authority URSEC (Unidad Reguladoria de Servicios de Comunicaciones) no longer releases type approval certificates for 5.470 - 5.725 GHz WLAN band as this band has been assigned for government use only. Devices operating in this band and with an existing URSEC Type Approval certificate may continue to operate. For new applications, the master device must have this specific band restricted: As for client devices, only passive scanning or an Ad hoc mode is allowed.
Radio Type Approval, Homologation, Certification Services - Global Market Access Solutions
We can offer you reliably all services concerning Type Approval in Uruguay (Montevideo). Our distinguished contact with the authority in Uruguay (Montevideo), our good relationship to Unidad Reguladora de Servicios de Comunicaciones (URSEC) as well as the qualification in the homologation of consumer and automotive RF-products and Short Range Devices (SRD) in ISM-Frequency band will create your market access in Uruguay trouble-free and cost-effective.
We will assist you to put your product successfully on the market by offering the following services:
- Identify applicable requirements for your specific product or technology feature to comply with current regulations in safety, EMC, wireless, etc.
- Provide pre-compliance testing during the design and development phase to determine compliance
- Assist in completion of applications and other required forms
- Test in our accredited labs or your qualified facilities to issue CB Test Report and Certificate with applicable national differences and other test reports for wireless, etc.
- Handle entire submittal process including working with local testing and certification organizations
- Arrange for initial factory inspections that are required before certification issuance
- Coordinate verification testing on qualified products as needed
- Facilitate and expedite project progress with support of IB-Lenhardt AG local team and/or partner
- Support renewal maintenance of certificates as needed
- User manual translation service when needed
For Uruguay we can offer you a short termed tentative offer based upon a submitted Datasheet of the device:
GEO / MAP of Uruguay
General information about Uruguay
Degree of latitude
Degree of longitude
Size (in km²)
Population (as of 2011)
Country code according to ISO 3166-2
Country code according to ISO 3166-3
Certificate Example for Uruguay
Authority / Regulatory Body
Unidad Reguladora de Servicios de Comunicaciones (URSEC)
Validity Period of Certification
In-Country Testing Required?
Average lead time for radio type approval
News for Uruguay
Type approval for WLAN 5 GHz not allowed
(24GHz, 77GHz, 79GHz, UWB)
(315MHz, 433MHz, 868MHz)
(125kHz, 315MHz, 433MHz, 868MHz)
(Tank Level, Positions-Radar)
(315MHz, 433MHz, 868MHz)
(125kHz, 13,56MHz, 868MHz)
(24GHz, 60GHz, 79GHz)
Safety Information for Uruguay
The Type C electrical plug (or Europlug) is a two-wire plug that has two round pins. It fits into any socket that accepts 4.0 – 4.8 mm round contacts on 19 mm centres. They are being replaced by E, F, J, K or N sockets which work perfectly with Type C plugs. Type C plugs are generally limited for use in appliances that require 2.5 amps or less.
The Type F electrical plug (also known as a Schuko plug) has two 4.8 mm round pins spaced 19 mm apart. It is similar to the Type E plug but has two earth clips on the side rather than a female earth contact. The CEE 7/7 plug was developed to work with sockets E and F and has grounding clips on both sides (to work with Type F sockets) and a female contact (to accept the grounding pin of the type E socket). Type F plugs are rated 16 amps.
The Type I plug has two flat pins in a V-shape as well as a grounding pin. A version of the plug, which only has the two flat pins, exists as well. The Australian plug also works with sockets in China. Australia’s standard plug/socket system is rated 10 amps but a plug/socket configuration rated 15 amps also exists, although the ground pin is wider. A standard 10 amp plug will fit into a 15 amp socket but not the other way around.
There are two variations of the Type L plug, one rated at 10 amps, and one at 16 amps. The 10 amp version has two round pins that are 4 mm think and spaced 5.5 mm apart, with a grounding pin in the middle. The 16 amp version has two round pins that are 5 mm thick, spaced 8mm apart, as well as a grounding pin. Italy has a kind of “universal” socket that comprises a “schuko” socket for C, E, F and L plugs and a “bipasso” socket for L and C plugs.