TAMSys Login



Worldwide Homologation
Type Approval Specialists
Tel.: +49 6894 38938-0
Fax: +49 6894 38938-99

 

Australia

Radio Type Approval, Homologation, Certification Services - Global Market Access Solutions

We can offer you reliably all services concerning Type Approval in Australia (Canberra). Our distinguished contact with the authority in Australia (Canberra),our good relationship to Australian Communication and Media Authority, as well as the qualification in the homologation of consumer and automotive RF-products and Short Range Devices (SRD) in ISM-Frequency band will create your market access in Australia trouble-free and cost-effective.

We will assist you to put your product successfully on the market by offering the following services:

  • Identify applicable requirements for your specific product or technology feature to comply with current regulations in safety, EMC, wireless, etc.
  • Provide pre-compliance testing during the design and development phase to determine compliance
  • Assist in completion of applications and other required forms
  • Test in our accredited labs or your qualified facilities to issue CB Test Report and Certificate with applicable national differences and other test reports for wireless, etc.
  • Handle entire submittal process including working with local testing and certification organizations
  • Arrange for initial factory inspections that are required before certification issuance
  • Coordinate verification testing on qualified products as needed
  • Facilitate and expedite project progress with support of IB-Lenhardt AG local team and/or partner
  • Support renewal maintenance of certificates as needed
  • User manual translation service when needed


For Australia we can offer you a short termed tentative offer based upon a submitted Datasheet of the device:
quote@ib-lenhardt.de



GEO / MAP of Australia


General information about Australia

Formal Name
Australia


Capital
Canberra


Continent
Oceania


Degree of latitude
-28.32426280242283


Degree of longitude
137.44317938666993


Currency
Australian dollar


Country code
+ 61


Top-level domain
.au


Languages
English


Size (in km²)
7,686,850.0 km²


Population (as of 2011)
22620600 Einwohner


Date of joining the UN
01.11.1945


Country code according to ISO 3166-2
AU


Country code according to ISO 3166-3
AUS


Certificate Example for Australia

Example Radio Type Approval Certificate for Australia
Download Certificate
PDF / JPG



Mandatory / Voluntary
Mandatory

Authority / Regulatory Body
Australian Communication and Media Authority

Validity Period of Certification
unlimited

Local Representative Required?
Yes

In-Country Testing Required?
Yes

Average lead time for radio type approval
4 weeks

Label Example for Australia

Example Radio Type Approval Label for Australia
Download Label
PDF / PNG



Marking of Certification Logo or Number Required?
Yes

Size
3 mm

Specific User Manual Requirements?
No

News for Australia


  • ACMA adopts Safety standards

    Telecommunications (Customer Equipment Safety) Technical Standard

    The ACMA standard Telecommunications (Customer Equipment Safety) Technical Standard 2018 (the Customer Equipment Safety Standard) adopts the following Australian/New Zealand Standards:

    • AS/NZS 60950.1:2015 – Information technology equipment – Safety, Part 1: General requirements (the 2015 industry standard); and

    • AS/NZS 62368.1:2018 – Audio/video, information and communication technology equipment – Part 1: Safety requirements (the 2018 industry standard).

    The 2018 industry standard is intended to replace the 2015 industry standard four years after 15 February 2018. During that period, a relevant item of customer equipment may, under the 2018 industry standard, comply with either the 2015 industry standard or the 2018 industry standard. 

    The ACMA has made the Customer Equipment Safety Standard to repeal and replace the 2011 ACMA Standard to reflect the latest technical requirements for particular customer equipment.

    For detailed information pleas visit ACMA’s website.

    Source: https://acma-search.clients.funnelback.com/s/search.html?collection=acma&query=62368

     


  • Proposal to update LIPD Class Licence

    The ACMA is currently consulting on proposed updates to the Radiocommunications (Low Interference Potential Devices) Class Licence 2015.

    The LIPD Class Licence operates in concert with the ACMA’s  Radiocommunications (Short Range Devices) Standard 2014

    Under section 8A of the Short Range Devices Standard, if the proposed updates to the LIPD Class Licence are made, the standard for performance for items being updated in the LIPD Class Licence will be those standards listed in the updated LIPD Class Licence for that item. A transition period of one year from when the LIPD Class Licence is made applies before it is mandatory for a supplier to comply with the standards requirement.

    In detail, the proposed updates to the LIPD Class Licence consider:

    • updating and expending existing 60 GHz arrangements (57–66 GHz) for data communication systems, including 5G. Specifically:
      • adding the 66–71 GHz frequency band
      • updating existing arrangements in the 57–66 GHz band regarding indoor and outdoor data communications systems.
    • adding new arrangements for ‘all transmitters’ in the 57–64 GHz band
    • revising arrangements for underground transmitters in certain bands supporting fixed and mobile services from 70–520 MHz
    • adding support for higher power radiodetermination transmitters, i.e. radars operating in the 76–77 GHz frequency band
    • adding support for ground and wall penetration radar as adjunct to current apparatus licence arrangements (30–12,400 MHz)
    • aligning existing arrangements for ultra-wideband devices with US and European arrangements for generic (indoor and hand-held) devices (3,100–3,400 MHz and 8,500–9,000 MHz) and aircraft applications (6,000–8,500 MHz).

    In addition to the proposed variation, the ACMA invites suggestions from industry and individuals on devices and technologies for possible future updates to be included on the list of transmitters authorised under the LIPD Class.

     

    Source acma.gov.au


  • New amendment on technical standards and labelling

    On 6 December 2018, the ACMA remade the following telecommunications technical standards under section 376 of the Telecommunications Act 1997:

    The ACMA also made the Telecommunications (Labelling Notice for Customer Equipment and Customer cabling) Amendment Instrument 2018 (No.1) under subsection 407(1) of the Telecommunications Act to make consequential and other amendments to the Telecommunications Labelling Notice. The compilation—which includes the above amendment—of the Telecommunications Labelling Notice is available on the Federal Register of Legislation

    The submissions received during the consultation periods are available on the ACMA website.

    Following consultation, the ACMA has remade the standard that mandates a two-part industry standard for radiocommunications devices operating in the very high frequency (VHF) maritime mobile bands. The Radiocommunications (VHF Radiotelephone equipment - Maritime Mobile Service) Standard 2018 adopts three new industry standards and their European Telecommunications Standards Institute equivalents.

    The ACMA received one submission to this consultation, which can be accessed on our website.


  • Australia Consults the Public About Telco Standards and Labelling

    Australia's ACMA (Australian Communications and Media Authority) is conducting a public consultation on its standards of telecommunication devices and labelling thereof.

    Background information and draft versions of the proposed

    • Customer Equipment Safety Standard
    • Mobile Equipment Standard
    • Labelling Notice

    can be found at Remaking telco standards and changes to the labelling notice. The consultation is ending on 2018-09-02.


  • Update on Compliance Labeling Notice

    In September 2014, the AMCA (Australian Communications and Media Authority) published the Radiocommunication Devices (Compliance Labelling) Notice 2014, superseding the Notice 2003. The 2014 Notice does not make any significant changes but was mainly created to replace the 2003 Notice, due to expire on 2015-04-01 (sunset date) in accordance with Part 6 of the Legislative Instrument Act 2003.


  • ACMA issues 2.3 GHz guidelines

    ACMA (Australian Communication and Media Authority) published the “Interference to Spectrum Licensed Receivers – 2.3 GHz Band” Radiocommunication Advisory Guidelines on 2013-12-12, superseding the “Managing Interference to receivers – 2.3 GHz Band” Radiocommunication Advisory Guidelines and coming into effect on 2015-07-25.

    The purpose of these guidelines is to:

    • manage in-band and out-of-band interference by providing compatibility requirements for registered fixed receivers operating under spectrum licences issued for the 2.3 GHz band;
    • provide protection to radiocommunications receivers operating under spectrum licences issued for the 2.3 GHz band from interference caused by radiocommunications transmitters operating under a class licence, and from fixed transmitters operating under either:
    1. an apparatus licence issued on or after the date on which these guidelines commence
    2. a spectrum licence where the transmitter is registered under Part 3.5 of the Act on or after the date on which these guidelines commence.

  • New ACMA spectrum plan possibly drastically reduces smartphone costs world wide.

    The ACMA (Australian Communication and Media Authority) published a new spectrum plan for the 700 MHz frequency band on 2012-11-19. The Plan has the potential to drastically reduce the costs of smartphones around the World. The “Asia-Pacific Telecommunity (APT) 700 MHz spectrum band plan“ is committed or seriously considered to be adopted by several countries such as Australia, Chile, Columbia, Costa Rica, Ecuador, Mexico, Panama, India, Japan, New Zealand, Papua New Guinea, Tonga and the United Arab Emirates.



Product scope

Automotive

Radar
(24GHz, 77GHz, 79GHz, UWB)

Funkschlüssel
(315MHz, 433MHz, 868MHz)

Keyless Go
(125kHz, 13,56MHz)

Reifendrucksensoren
(125kHz, 315MHz, 433MHz, 868MHz)

Entertainment
(2,4GHz)

Industrie

Radar
(Tank Level, Positions-Radar)

Wireless-M-Bus
(315MHz, 433MHz, 868MHz)

Wireless-CAN-Bus
 

RFID
(125kHz, 13,56MHz, 868MHz)

UWB Devices
(24GHz, 60GHz, 79GHz)

Consumer Elektronik

WirelessHD
(60GHz)

WLAN
(2,4Ghz, 3GHz, 5GHz, 10GHz)

Bluetooth
(2,4GHz)

Zigbee
(868MHz, 2,4GHz)

This website uses cookies to enhance your browsing experience. By using this website, you consent to the use of cookies. Privacy Statement